Panel Configuration · Adhesive

Peel and Stick Adhesive

PSA lamination applies a high-tack pressure sensitive adhesive to one or both faces of a honeycomb panel. The adhesive surface is covered with a protective release liner that keeps it inactive during storage. At the point of use, the operator peels the liner and presses the panel into place — forming a strong, immediate bond.

How it works.

The PSA layer is applied to the facing paper during production and covered with a coated release liner. The adhesive remains inactive while the liner is in place — it can be stored and handled without bonding to adjacent surfaces.

When the liner is removed, the adhesive is exposed and immediately ready to bond on contact with pressure. A firm, even press against the receiving surface activates the adhesive across the full contact area. Double-sided PSA panels allow the panel to be sandwiched and bonded between two substrates in a single operation.

Technical Specifications

  • Adhesive Type

    High-tack pressure sensitive adhesive

  • Application Sides

    Single or double face

  • Release Liner

    Silicone-coated · peeled at point of use

  • Activation

    Pressure contact - No heat, cure time, or tools required

  • Panel Compatibility

    Any flat panel within standard dimension ranges

Design considerations.

  • PSA bonding strength is affected by surface cleanliness, porosity, and temperature. Confirm substrate compatibility before specifying for critical bonding applications.

  • PSA panels should be stored flat and away from heat sources. Elevated temperatures can affect adhesive tack and liner peel performance.

  • For double-sided applications, plan your assembly sequence. Once the first liner is removed, the panel will adhere on contact.

  • For high-temperature storage or transport environments, discuss adhesive specification requirements with us.

Applications

Common applications.
Peel and Stick Adhesive can be implemented for a variety of applications. The examples below are illustrative starting points, not standard SKUs. Let’s develop your solution.

Automotive Interior Bonding

Panels bonded to door substrates, headliners, trunk liners, and load floors — providing structural rigidity without wet adhesive processing.

Packaging Block & Brace

PSA panels bonded to the inside faces of shipping cartons or crates to create fixed blocking and bracing without fasteners.

Protective Pad Mounting

Protective pads bonded directly to product surfaces or packaging components — ensuring the pad stays in place during pack-out and transport.

Display Construction

Panels bonded in place during display assembly — PSA eliminates wet adhesive and reduces assembly time for retail display builds.

Window Manufacturing

Honeycomb pads can be mounted directly on panes to create separation during transportation and eliminate the potential for breakage.

Electrical Enclosure Manufacturing

Honeycomb spacers can be mounted between nested cabinets to prevent unwanted movement and protect the final finish during transportation.
Browse all products